Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Paradise, NV
Most of the chimney work we do in Paradise isn’t heavy wood-burning flues – it’s repair and verification. Paradise is a nearly built-out unincorporated community next to the Strip, filled with tract homes and mid-rise condos from the 1960s through the 2000s, and a large share of its fireplaces are decorative gas or gas-log units that owners treat as if they were real woodburning chimneys. That changes what a technician actually does here: often the job is inspecting, documenting and repairing venting rather than sweeping soot. Our technicians have up to 12 years of experience, and we work with professional-grade materials on every job. Call (844) 314-6144 for a free estimate.
Why Paradise Homes Are Different
Paradise’s housing stock is the first thing a technician notices. Most of the community is mid-century and late-20th-century tract housing, townhomes, and high-rise or HOA condos along and off the Strip corridor. Many of those homes have factory-built metal fireboxes and short exterior chimneys rather than masonry stacks, and plenty of fireplaces have been converted to gas logs or sealed off entirely. We routinely find abandoned flues, missing dampers, and unlined or damaged prefab chimney sections where a brick chimney would normally be.
The Mojave Desert climate does the rest. Extreme summer heat, very low humidity, and frequent high-wind events crack and spall masonry crowns and chimney caps and dry out caulk and flashing. Winter use is light and concentrated in short cold snaps, so creosote buildup is usually minor. Wind and UV damage, plus birds and animals getting into uncapped caps, drive most of the calls we get in Paradise. In HOA communities, exterior changes to a chimney termination often need board approval before work starts, so it’s worth asking before you schedule.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Paradise Services
Paradise homeowners call us most often about two things: getting a fireplace or flue properly cleaned and checked, and clearing the dryer vent before lint becomes a fire risk.
Chimney Sweep in Paradise
Sweeping a Paradise chimney usually means inspection first. Because so many fireplaces here are gas or gas-log conversions, we start by confirming what the flue actually is, whether it’s still connected, and whether the damper opens. Where there is real wood use, we remove creosote and soot with professional brushes and a HEPA vacuum so nothing ends up in your living room. Where the fireplace is decorative, the value is in the documentation: a clear picture of the flue condition, the cap, and the venting. If you want the full rundown on how a chimney sweep works in this housing stock, that page covers it in detail.

Dryer Vent Cleaning in Paradise
Your dryer vent is a chimney too, and in Paradise’s compact condos and townhomes the run from the dryer to the exterior wall is often short, bends hard, and clogs faster than owners expect. Slow drying cycles and a hot dryer top are the usual signs. We pull the lint from the full length of the duct, check the exterior termination and flap, and confirm the run isn’t crushed behind the unit. It’s a standalone job or an add-on to a chimney visit. See dryer vent cleaning for the full process.

Chimney Repair in Paradise
Chimney repair in Paradise is shaped by two things: a housing stock full of factory-built fireboxes and converted gas fireplaces, and a desert climate that attacks the outside of a chimney rather than the inside. Heat, low humidity and high wind crack crowns and caps, dry out flashing sealant, and open gaps that birds and debris find quickly. Much of what we repair here is the top of the chimney and the venting around it rather than firebox masonry. For the full scope of what we handle, see our Chimney Repair page. Below are the repairs Paradise homeowners ask about most.
Chimney Cap Installation
Signs you need it
You need a cap if the termination is open to the sky, if you’ve heard birds or scratching in the flue, or if wind-driven dust settles on the firebox floor between uses.
What it costs in Paradise
Cap installation typically runs $150 to $450, depending on the flue size and whether the cap is a simple universal fit or a custom fabrication.
How we do it
We measure the flue opening, fit a listed cap sized to that termination – Olympia Chimney and Copperfield components are common choices – and secure it so it sheds wind without rattling.
Chimney Cap Replacement
Signs you need it
Replace a cap when it’s rusted through, bent by wind, missing its mesh, or sitting loose enough to lift in a gust.
What it costs in Paradise
Replacement usually falls between $150 and $450, and the figure moves with the flue size and how much of the old assembly has to come off first.
How we do it
We remove the failed cap, inspect the termination and crown beneath it for damage the old cap was hiding, then install and fasten a new professional-grade cap.
Chimney Liner Installation
Signs you need it
An unlined or damaged flue, a gas appliance that doesn’t draft cleanly, or visible cracks and gaps in a prefab section all point to relining.
What it costs in Paradise
Liner installation typically ranges from $1,800 to $4,500, driven mainly by flue height, liner type and whether the old liner has to be removed.
How we do it
We inspect the flue with a camera, size the liner to the appliance, and install a DuraFlex liner system with the connections and termination hardware the manufacturer specifies.
Chimney Flashing Repair
Signs you need it
Look for dried, cracked sealant at the roof joint, water staining on the ceiling near the chimney, or flashing you can lift by hand.
What it costs in Paradise
Flashing repair is typically $250 to $750, higher where the flashing has to be rebuilt rather than resealed.
How we do it
We clear the old caulk, check the flashing and counter-flashing for rust and separation, then reseal or refit it with a UV-stable sealant suited to desert sun.
Chimney Crown Repair
Signs you need it
A crown with visible cracks, a crumbling edge, or a top that holds water after a rare rain are all reasons to repair it.
What it costs in Paradise
Crown repair typically costs $300 to $900, with the upper end covering a full crown rebuild on a larger masonry top.
How we do it
We chip out the failed material, shape the crown so it drains away from the flue, and finish it with a resurfacing system matched to the chimney’s condition.
What Chimney Repair Costs in Paradise
| Item | Typical range in Paradise |
|---|---|
| Chimney cap installation or replacement | $150 – $450 |
| Chimney liner installation | $1,800 – $4,500 |
| Chimney flashing repair | $250 – $750 |
| Chimney crown repair | $300 – $900 |
Do I really need a new liner in my Paradise home?
Not always. We only recommend relining when camera inspection shows cracks, gaps or an unlined flue venting a gas appliance. You see the footage before you decide, and if the liner is sound we tell you so. Call (844) 314-6144 for an exact quote – estimates are free.
Can a damaged chimney cap wait until next season?
Sometimes it can wait, and we’ll say so. A cap that’s merely weathered is low priority. A cap that’s loose, missing mesh, or letting water into the flue should be dealt with before winter, since desert wind and nesting animals get in fast.
Brands We Service in Paradise
We work with professional-grade chimney brands rather than generic substitutes: DuraFlex liner systems, HeatShield resurfacing, and components from Olympia Chimney, Famco and Copperfield. These are the parts certified chimney professionals install, and they’re what we fit on Paradise jobs. Turnaround depends on whether a component has to be ordered to size. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Paradise, NV
| Service | Typical range in Paradise |
|---|---|
| Chimney sweep | $120 – $300 |
| Dryer vent cleaning | $100 – $250 |
| Chimney inspection with camera | $150 – $350 |
| Chimney cap installation or replacement | $150 – $450 |
| Chimney flashing repair | $250 – $750 |
| Chimney crown repair | $300 – $900 |
| Chimney liner installation | $1,800 – $4,500 |
| Masonry repair and resurfacing | $500 – $2,500 |
In Paradise, price climbs when a job moves from the top of the chimney to the flue itself – relining and masonry work carry the larger figures, while caps, crowns and flashing sit lower. Height, roof access and condo or HOA logistics can also add time. Every job is priced per written estimate before we start, so the number you agree to is the number on the invoice.
Neighborhoods We Serve in Paradise
We work throughout Paradise, from the streets just off the Strip corridor to the residential pockets tucked behind the resort blocks. Because so much of the community is HOA-managed, we’re used to coordinating roof access and exterior work with board rules before a job starts. Response across Paradise is generally quick given how compact the community is.
- Paradise corridor along the Strip
- Winchester area
- Residential tracts off Flamingo Road
- Condo and townhome communities near the Convention Center
- Neighborhoods along Tropicana Avenue
Service Area – Cities Near Paradise
Paradise sits in the middle of the valley, so we regularly work in the communities around it. If you’re just outside Paradise, we can still help – the housing stock and desert conditions are much the same. We cover Spring Valley, NV to the west, Enterprise, NV to the southwest, Las Vegas, NV on the surrounding sides, and Sunrise Manor, NV to the northeast.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Paradise
Paradise is compact, so scheduling is usually straightforward. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside those hours is booked into the next opening.
It depends on the job and the community. Most cities require a permit for structural chimney work, so ask your city’s building department, and check with your HOA before changing anything on an exterior termination. We can walk you through what the work involves so you know what to ask.
Yes. We serve all of Paradise, including the Strip corridor, Winchester and the residential tracts off Flamingo and Tropicana. If you’re unsure whether your address falls inside the boundary, call (844) 314-6144 and we’ll confirm.
If your fireplace, flue or dryer vent needs attention in Paradise, call (844) 314-6144 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Paradise Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Eduardo Reyes"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Beatriz Rodriguez"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Raj Sharma